Hi,
We are trying to order some 2080V aluminum extrusions. In addition to tapping, we need some special machining on the ends. How can we get a quote for this?
thanks,
Joy
Hi Joy,
As long as it’s not too precise or complicated, we can probably do it. You can send me the machining drawings and I’ll take a look.
Hi,
We are trying to order some 2080V aluminum extrusions. In addition to tapping, we need some special machining on the ends. How can we get a quote for this?
thanks,
Joy
Thanks, Frank.
What we’re trying to do is use the whistle on one end to connect two 2080V extrusions. On the other end, we need four tapped holes, like this: https://diycnc.ca/product/aluminum-extrusion-whistle-corner-connector/
We tried using a regular drill bit to make the holes for the whistle, but it looks pretty ugly. 😄 If you have a better way to make those whistle holes, that would be great.
We are using CNC machining for this. Once installed, the whistle surface should be roughly flush with the surface of the aluminum extrusion.
Regarding the price, it will depend on the total number of machined holes and any other requirements. You can contact us by email with the detailed requirements, and we can provide a quote.