Notifications
Clear all
6 days ago
Replied to the topic MKS ESP-TFT35 Machine type to CNC
$32 is to enable or disable laser. There is nothing different between 'Laser' and 'CNC' except Z axis function. LaserGrbl is for laser, you can test the 'CNC' from any CNC software for example: gSender, UGS or other simiar software.
6 days ago
Replied to the topic MKS ESP-TFT35 Machine type to CNC
I changed values from LaserGRBL. Is there another way?
6 days ago
Replied to the topic MKS ESP-TFT35 Machine type to CNC
Hi,
Changing $32 value to 1 or 0 does not change anything.
Maybe there is something I'm doing wrong.
6 days ago
Replied to the topic MKS ESP-TFT35 Machine type to CNC
Hi,
There are two configurations you have to check:
1)$32, switch between CNC and Laser
2)$45, setup A as 2nd Y. 0: As Y axis, 1 as A, 2 as laser auto focus.
HTH
6 days ago
Created the topic MKS ESP-TFT35 Machine type to CNC in General Discussion
I recently bought an MKS DLC32 MAX with an LCD screen on your site. I would like to change the machine type of my MKS ESP-TFT35 V4.1 from LASER to CNC.
It appears that the available firmware is LASER only. On MKS's GitHub, the recent firmware versions also seem to be restricted to LASER....