Notifications
Clear all
Aug 31, 2026 12:12 am
Creating two LinuxCNC project: 1) EtherCAT Drive Servo Motors, 2) CANOpen Closed Loop. Putting the list below:
| EtherCAT Pro Kit | CANOpen Learning Kit | Notes | |
| 1 | Raspberry Pi 4B | Raspberry Pi 4B | 4G, Case, 32G MicoSD, Preinstalled and configure LinuxCNC |
| 2 | 7" Touch Screen | 7" Touch Screen | Capacitive IPS |
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | |||
| 13 | |||
| 14 | |||
| 15 | |||
| 16 | |||
| 17 | |||
| 18 | |||
| 19 | |||
| 20 | |||
| 21 | |||
| 22 | |||
| 23 | |||
| 24 | |||
| 25 |